==== Installation Raspbian  ====

  *  [[http://www.raspberrypi.org/downloads|Page des downloads de raspberry]]
  *  Télécharger directement Raspbian
  *  [[http://elinux.org/RPi_Easy_SD_Card_Setup|Comment installer sa carte SD]]
  *  vérifier le checksum (sha1sum) du zip avant l'extraction
  *  démonter la partition qui pourrait s'être montée automatiquement 
  *  dd bs=4m if=~/Downloads/fichier-img.img of=/dev/rdisk3 (ne pas préciser de partition)


==== Premier démarrage  ====

  *  brancher clavier, souris, HDMI, alimentation (et boot)


==== options/commandes du premier boot ====

  *  expand filesystem
  *  I18N options : 
    *  Locale : be_BY.UTF-8 UTF-8 (keep en_GB.UTF-8 as default locale)
    *  TimeZone : Europe  Brussels
    *  Keyboard layout :
      *  102 intl > Others > Belgian > Belgian [no caption after] 
      *  Alt gr => the default fort the keyboard layout
      *  No compose key
      *  Ctrl alt backspace do nothing

  *  Advanced options
    *  Hostname : sensors
    *  Memory split (for gpu): min => 16
    *  SSH Server enabled

  *  quit and reboot it through network link


==== Après le reboot sur le réseau  ====

  *  sudo aptitude update
  *  sudo aptitude upgrade
  *  ssh-keygen -t dsa
  *  .ssh/config Host nono HostName laf.mooo.com
  *  ssh-copy-id -i .ssh/id_dsa.pub nono


==== Install des auto tunnels  ====

  *  aptitude install autossh
  *  /etc/defaults/autossh :
  # Settings for autossh.  This file is sourced by /bin/bash from
  # /etc/init.d/autossh.
  
  AUTOSSH_USER=pi
  autossh_opts -M 0 -q -N -f -o ServerAliveCountMax=3 \
                            -o ServerAliveInterval=60
  
  tunnel -R 2002:localhost:22 -R :8001:localhost:8000 nono

[[electronique:script_autossh_initd]]

  *  chmod +x /etc/init.d/autossh
  *  mkdir /var/run/autossh
  *  /etc/init.d/autossh
  *  update-rc.d autossh defaults


==== Access to gitolite repo  ====

get the public key of sensors device & put into the gitolite config
config .ssh/config : 
  Host git
  User git
  HostName helpcomputer.org
  Port 2233


==== Access to gitolite repo  ====

git clone git:domotique


==== Reinstall bcm2835.h ====

http://www.airspayce.com/mikem/bcm2835/
follow the instruction remove all tgz & folder
tester le make sinon try again

==== gpio cli install  ====

https://projects.drogon.net/raspberry-pi/wiringpi/download-and-install/


==== Sakis-3g  ====

  *  cd /tmp
  *  git clone https://github.com/Trixarian/sakis3g-source.git
  *  sudo aptitude install libusb-dev
  *  cd sakis3g-source
  *  ./compile
  *  follow the step by step from compile : 
  For installing it, use:
  $ sudo bash || su
  # cp build/sakis3gz /usr/bin/sakis3g
  *  remove /tmp/sakis3g-source


=== ppp  ===

Is needed by sakis3G
  *  aptitude install ppp


=== Sakis: Establish a connection  ===

Use the following command to known what to specify into APN variable
  sudo sakis3g --interactive connect

create /etc/sakis3g.conf
and put into :
  APN=internet.proximus.be

A run of sudo sakis3G connect works


==== UMTS Keeper  ====

Reference : http://mintakaconciencia.net/squares/umtskeeper/

  *  wget http://mintakaconciencia.net/squares/umtskeeper/src/umtskeeper-2.03.tar.gz
  *  move into a specific folder & make a tar zxvf 
  *  chmod +x umtskeeper
  *  cp umtskeeper.conf.sample umtskeeper.conf
  conf['deviceName'] = 'Huawei'
  conf['logMsg'] = True
  conf['httpServer'] = True
  conf['writeHTMLStats'] = True
  #The Parameters are

Create the following folders: 
  *  /run/umtskeeper/
  *  /var/log/umtskeeper/

Move:
  *  umtskeeper into /usr/bin/
  *  umtskeeper.conf into /etc

Done you can run now : 
  sudo umtskeeper --conf /etc/umtskeeper.conf

Add the following line to your /etc/rc.local
  /usr/bin/umtskeeper --conf /etc/umtskeeper.conf

Retrieve some file from umts tgz and put it into webfolder:
 sudo cp favicon.ico style.css robots.txt /var/run/umtskeeper/